Pioneer PDK-1014 Bedienungsanleitung Seite 13

2. Insert the stand into the plasma display
Check that the stand and plasma display are facing the proper direction, then insert the plasma display into the stand.
This procedure should be done by at least three persons, since the plasma display is heavy and has a high center of gravity.
Hold the bottom and the grips on the back of the plasma display and support the top when inserting the plasma display into the
stand.
Plasma Display
Installing the Plasma Display on the Stand
Hold both sides of the plasma display
and lift it up, then place the plasma
display onto the stand so that the holes
located at the bottom of the display
engage with the stand.
E-5