Akai FXsystemM630 Bedienungsanleitung Seite 9

Connecting additional components
Before proceeding
@ Make sure that the power to all components is off before
making connections.
PHONO, VCR, AUX, and PROCESSOR
terminal connections
Use the following connections to connect a processor (graphic
equalizer etc.), VCR, auxiliary source (cassette deck etc.) or
turntable to the amplifier. For detailed information concerning
connections, refer to the components operator's manual.
Graphic equalizer or
other processor
Cassette deck or
other auxiliary source
or
About the PROCESSOR terminal
short pins
The short pins connect the pre-amp and power amp sec-
tions of the amplifier. Only remove these pins when con-
necting a graphic equalizer or other processor. Do not
loose the pins. When replacing the pins, insert as illus-
trated.
Remove
PROCESSOR
PROCESSOR
DIGITAL OUTPUT and DIGITAL 1/2
terminal connections (AM-M830
model only)
Use the following connections to connect a DAT (Digital Audio
Tape) deck or DBS (Direct Broadcast Satellite) tuner to the am-
plifier.
DAT deck
Amplifier
DIGITAL IN
DIGITAL OUT
DBS Tuner
DIGITAL OUT