SUPERTOOTH ONE Bedienungsanleitung Seite 6

you to say the voice tag of the contact to call and the
Bluetooth Indicator (7) will turn steady blue.
3. Say the voice tag exactly as how you recorded it.
4. The voice tag will be played back to you and then the phone
will dial the number automatically.
Redial
(For Handsfree Profile Phones only)
Press the MFB (1) for 3 seconds. The last dialed number will be
redialed.
Reject a Call
(For Handsfree Profile Phones only)
During the ring tone, press the End/Reject Button (4) for 1
second. The incoming call will be rejected.
Volume Setting:
Increase or decrease the volume by pressing the Volume Up (3)
or Volume Down (2) button. Press repeatedly until the desired
level is reached. The Bluetooth Indicator (7) will turn violet as
lowest and highest levels are reached.
Audio Transfer
(For Handsfree Profile Phones only)
During an ongoing call, you can transfer the audio.
Kit to Phone: Press and hold the MFB (1) for 3 seconds and
the audio will be transferred to the phone.
6
ST_ONE_manual_06132008.indd 6
:
:
:
Phone to Kit: Press the MFB (1) for 1 second and the audio
will be transferred to the handsfree kit.
Note: For some phones, you may need to accept a connection prompt
on the phone before automatic transfer takes place.
H. Stream Music from your A2DP Bluetooth
Mobile Phone:
If a phone supports A2DP, you can stream music from your
phone to the SUPERTOOTH ONE.
Note: The SUPERTOOTH ONE needs to be 'paired' with your Bluetooth
mobile phone before you can use the following functions. (See "Pairing
to your Bluetooth Mobile Phone on section E".)
Using A2DP Music Streaming
To Stream Music:
• Go to your phone's music player and play a track via A/V
bluetooth. (See your phone's manual).
• Or Double Short Press the MFB (1) to play / pause music
streaming.
6/13/2008 6:37:13 PM