Herunterladen Inhalt Inhalt Diese Seite drucken
Anleitung zur Schnellinstallation
TEW-648UBM
1.01
Inhaltsverzeichnis
loading

Inhaltszusammenfassung für TRENDnet TEW-648UBM

  • Seite 1 Anleitung zur Schnellinstallation TEW-648UBM 1.01...
  • Seite 2: Inhaltsverzeichnis

    Table of Contents Deutsch 1. Bevor Sie anfangen 2. Installation der Hardware 3. Verwendung des drahtlosen Adapters Troubleshooting Wireless Tips Version 09.08.2010...
  • Seite 3: Deutsch

    1. Bevor Sie anfangen Packungsinhalt TEW-648UBM Treiber-und Dienstprogramm-CD Mehrsprachige Installationsanleitung Systemanforderungen USB-Port: 1.1 oder 2.0 CD-ROM-Laufwerk Unterstützte Betriebssysteme Prozessor Speicher Windows 7 (32/64-bit) 1GHz oder schneller 1GB RAM oder mehr Windows Vista (32/64-bit) 800MHz oder schneller 512MB RAM oder mehr...
  • Seite 4: Installation Der Hardware

    2. Installation der Hardware Wichtig! Verbinden Sie den drahtlosen USB-Adapter NICHT mit dem Computer, bevor Sie dazu aufgefordert werden. 1. Legen Sie die Treiber- und Dienstprogramm-CD in das CD- ROM- Laufwerk Ihres Computers ein. 2. Klicken Sie auf Run Autorun.exe (autorun.exe ausführen) (nur Windows 7/Vista).
  • Seite 5 5. Klicken Sie auf Install this driver software anyway (Treibersoftware dennoch installieren) (Windows 7/Vista). 6. Klicken Sie auf Continue Anyway (Vorgang dennoch fortsetzen). (Windows XP). 7. Klicken Sie auf Finish (Fertigstellen). 8. Verbinden Sie den Funkadapter mit einem verfügbaren USB-Anschluss Ihres Computers. 9.
  • Seite 6: Windows Xp

    Windows XP 10. Jetzt erscheint der Found New Hardware Wizard (Assistent “Neue Hardwarekomponente gefunden”). Markieren Sie No (Nein) und klicken Sie dann auf Next (Weiter). 11. Markieren Sie Install the software automatically (Recommended) (software automatisch installieren) (Empfohlen) klicken Sie auf Next (Weiter). 12.
  • Seite 7: Verwendung Des Drahtlosen Adapters

    Die drahtlose Verbindung ist jetzt vollständig konfiguriert. Hinweis: Weitere Informationen zu den Konfigurations- und erweiterten Einstellungen derTEW-648UBM finden Sie im Abschnitt „Problembehandlung“ der Bedienungsanleitung auf der beiliegenden Dienstprogramm-CD oder auf der Website von TRENDnet unter www.trendnet.com. Registrieren Sie Ihr Produkt...
  • Seite 8: Troubleshooting

    3. To access the device manager on Windows XP, right-click My Computer, click Properties, click the Hardware tab, and then click Device Manager. If you still encounter problems or have any questions regarding the TEW-648UBM, please refer to the User's Guide included on the Utility & Driver CD-ROM or contact TRENDnet's Technical...
  • Seite 9: Wireless Tips

    Wireless Tips The following are some general wireless tips to help minimize the impact of interference within an environment. Assign your network a unique SSID Do not use anything that would be identifying like “Smith Family Network”. Choose something that you would easily identify when searching for available wireless networks. Do not turn off the SSID broadcast The SSID broadcast is intended to be on and turning it off can cause connectivity issues.
  • Seite 10 3. Building materials can have a large impact on your wireless signal. In an indoor environment, try to position the wireless devices so that the signal passes through less dense material such as dry wall. Dense materials like metal, solid wood, glass or even furniture may block or degrade the signal.
  • Seite 11 Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.
  • Seite 12 Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.trendnet.com/register Copyright ©2010. All Rights Reserved. TRENDnet.

Inhaltsverzeichnis