Stavoklima DITRONIC Benutzerhandbuch Seite 28

En
DITRONIC-MANUAL
CORRECTION OF EXHAUST SENSOR
If the exhaust sensor measures fuzzily for
some reason, you can use this correction
to move the measured exhaust temperature
+/– °C.
CORRECTION OF ROOM SENSOR
If you did not succeed in placing the spatial
sensor for architectural or spatial reasons, and
the sensor gives biased results, you can modify
the measured temperature +/– °C by the co-
rrection. The correction is needed in case the
sensor is either sunk in sunlight or cooled.
CORRECTION OF OUTDOOR SENSOR
If you did not succeed in placing the outdoor
sensor for architectural or spatial reasons, and
the sensor gives biased results, you can modify
the measured temperature +/– °C by the co-
rrection. The correction is needed in case the
sensor is either sunk in sunlight or cooled.
The outdoor sensor must be enabled.
CORRECTION OF MEDIA SENSOR
If the media sensor measures fuzzily for some
reason, you can use this correction to move
the measured media temperature +/– °C.
Out of order if the outdoor sensor is enabled.
ACTIVATION OF THE OUTDOOR SENSOR
Activation of the outdoor sensor displays current outdoor tem-
perature. Automatic fan control based on the outdoor tempe-
rature can be activated in the service menu.
Outdoor
sensor OFF
28 | Stavoklima s.r.o. | www.stavoklima.cz | DITRONIC-MANUAL
0.0 °C
0.0 °C
0.0 °C
0.0 °C
Outdoor
sensor ON