Werbung
Verfügbare Sprachen
Verfügbare Sprachen
User Manual
EN
FireWare Mini-Silkflame
4.
Use
Remove all the packaging material of the FireWare Mini-Silkflame. Connect all the cables.
Please note: do not connect the power before the entire system has been set up and
properly connected.
1.
Remove all packaging.
2.
Place the machine on a level base.
3.
The silk flame (cloth) must be secured to the raised edge in the centre above the lighting.
4.
The FireWare Mini-Silkflame plug can be inserted into a standard, grounded 230 Volt
socket or extension lead.
5.
You can subsequently switch the machine on with the ON/OFF button.
5.
Operation (turn off)
When the appliance is in use you can turn off the flames at any time by turning the ON/OFF switch
on the appliance off.
Remove the plug from the socket. Fold the cloth on top of the housing.
If the cloth is damp as a result of the smoke liquid, it will first need to be rinsed and dried.
www.FireWare.nl
All manuals and user guides at all-guides.com
Afbeelding 2
FireWare Mini-Silkflame
11
Werbung
