Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SETTING PROCEDURE
Setting the time
1.
Pull the crown to Position 3.
2.
Turn the crown clockwise until the hands (A, B) are positioned at the desired time.
Note: When the hands (A) pass the 12, if the date changes, it means it is midnight and if the date does
not change, it means it is noon.
3.
When the start of the set time is announced (reference clock, radio, etc.), reset the crown to Position 1.
Quick date change
NB: To avoid damaging the movement, it is vital not to make the quick date change between
21:30 and midnight, since this is when the movement pinions are moving back for the
automatic date change.
1.
Pull the crown to Position 2.
2.
Turn the crown to advance the date (E) chronologically, until the desired date appears.
3.
Reset the crown to Position 1.
For months with less than 31 days, the date must be changed manually at the end of the month.
GENERAL INFORMATION
Care recommendations
Your Baume & Mercier watch was both designed and manufactured with great care. Please read our
recommendations for use and care on www.baume-et-mercier.com.
International warranty
Your Baume & Mercier watch is covered by the Baume & Mercier International Warranty.
The conditions of the Baume & Mercier International Warranty are available on www.baume-et-
mercier.com/customer-service/warranty.html.
Setting procedure – Quartz - hour, minute, date
QUARTZ – HOUR, MINUTE, DATE
A : Hours hand
B : Minutes hand
E : Date
4
Werbung
