ADE CK 2302 Bedienungsanleitung Seite 23

Setting the time and date manually
If there is more than approx. 20 seconds between two pushes of a button,
the setting process automatically ends and you will have to repeat it.
1. Press and hold the
blinks on the display.
2. Use the button
"12 H", morning hours will be marked with "AM" and afternoon hours with "PM" on
the display.
3. Press to save the setting. "00" flashes in the display for the time zone you are in
("00" is the default setting for the European mainland).
4. Proceed as previously described:
− Press the button
− Press
to save a setting.
5. You should set the following:
− Hours
− Minutes
− Date format (Day/Month or Month/Day)
− Year
− Month
− Day
− Language (relates exclusively to the weekday indicator)
6. Finally, press to conclude the procedure.
Starting signal reception of the time signal manually
If the radio signal symbol to the left is no longer displayed, the radio signals
from the time signal transmitter are no longer being received. The time
indicator nevertheless continues precisely.
− Press and hold the
end, if necessary) the signal reception.
Pay attention to the following:
‚ If the reception was not successful, the reception symbol fades out after a few
minutes and the time on the display continues normally.
‚ Upon successful signal reception, the radio-controlled clock adjusts itself to the
time of the time signal transmitter. If you have already made manual time and date
settings, they will be adjusted automatically.
CK 2302 DCF radio-controlled clock
button until the indicator for the 12- and 24-hour time format
or to set the desired time format: "12 H" or "24 H". If you choose
or to set the desired value.
button for a few seconds. This is how you manually start (and
Receiving the time signal
23