ADE CK 2302 Bedienungsanleitung Seite 21

1 Alarm function is enabled
2 Battery change indicator
3 Indoor temperature in °C or °F
4 Weekday abbreviation in the selected language
5 Date
6 DCF77 time signal transmitter is receiving a radio signal
7 Time
8 Suspension eyelet (3x)
9 Fold out support foot (2x)
10 Battery compartment
11 Battery compartment cover
‚ Activate settings mode
‚ Save setting
‚ Setting the alarm time
‚ Activates/deactivates alarm function
‚ increases values
‚ Manually start/terminate signal reception by the time signal
transmitter
‚ reduces values
‚ Switches between °C and °F
Start-up
The alarm clock is powered by four 1.5 V LR6 (AA) batteries.
1. Pull the battery compartment cover down.
2. Insert the batteries as indicated at the bottom of the battery compartment. Pay
attention to the correct polarity (+/-).
3. Replace the battery compartment cover and push it upwards. The locking tab must
snap audibly into place.
Once the batteries are inserted, the clock switches to the receiving mode, see next
chapter.
CK 2302 DCF radio-controlled clock
Start-up
21