Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3 MAINTENANCE AND STORAGE
Device maintenance consists of:
- Frequent washing in warm drinking water
(30°C), possibly with the addition of neutral
detergent. Rinse and, without spinning,
leave it to dry without leaving it in the direct
sunlight.
- Lubricate moving parts (only for metal
devices) with silicon-based oil. This
operation is to be performed once the
device has dried out, being careful to
avoid contact with textile components.
In addition, if necessary:
- disinfect
the
device,
warm water containing 1% of sodium
hypochlorite (bleach). Rinse with drinking
water and, without spinning, leave it to
dry without leaving it in the direct sunlight.
Avoid sterilising textile devices in an
autoclave.
4 PERIODIC INSPECTIONS
We would strongly advise having pre and
post use controls carried out by qualified
individuals, as indicated in the instructions
for the specific device.
Except in the case of more stringent legal
requirements, devices must be inspected
www.kong.it
Storage: store the devices in a dry (40-
90% relative humidity), fresh (temperature
5-30°C)
neutral (absolutely avoid salty and/or acid
environments), away from sharp edges,
corrosive substances or other possible
detrimental conditions.
soaking
it
in
annually and the inspections must be
performed by a competent person that
has been trained and authorised by the
manufacturer.
periodic inspections must be recorded on
the device's inspection chart.
and
dark
place,
The
outcome
CEVEDALE MONO
chemically
of
these
7
Werbung
