5. Timer: Week
5.1 Programming the week (Mon-Fri)
5.1.1
= Menu selection operating mode
5.1.2
= Select memory "M"
5.1.3
= Confirm
The lastly set operating mode flashes.
Memory "M" flashes.
The operating mode "Night operation" and
the reduction temperature are flashing.
5.1.4
= Proceed programming
5.1.5
= Proceed programming
5.1.6
= possibility to set the timer to the factory setting (see
"4.2 Factory setting"). If this is not desired, proceed with
position 5.1.7.
Control
Weekday and time are flashing.
Weekday and time strip are flashing.
"CLr" and "ALL"
are displayed
alternately; the
time strip and the
weekdays flash.
Control