OEM RD 61112 K Bedienungsanleitung Seite 19

2.4.2 Select memory M with
2.4.3 Confirm with .
2.4.4 Select the desired reduction temperature with
Confirm with .
or . Confirm with .
The lastly set reduction temperature and the
operating mode "Night Operation" are flashing.
The lastly set reduction temperature flashes.
The new reduction temperature and the
operating mode "Night Operation" are flashing.
Comfort |Control
2.4.5 Press
time-out.
2.5 Stand-by mode/antifreeze function
For prolonged times of absence (e. g. vacations) we recommend using
the stand-by mode. This will start a continuous heating pause which
will only be interrupted when the actual temperature drops to a value
below 8 °C. In this case the valve opens until the temperature reaches
8.2 °C. This prevents the radiators from freezing (anti-freeze function).
For this, press
or .
Deactivate the stand-by mode by pressing
set values will be displayed.
or in order to finish the setting, or wait for the
for 5 seconds.
The display shows "OFF" and "M".
again shortly. The lastly
Comfort |Control