Werbung
Verfügbare Sprachen
Verfügbare Sprachen
10
4
1
2
11
Description of buttons
1) Power ON/OFF button.
2) Water tank cover
3) Water tank
4) Water gauge
5) Bottom cover
6) Drip tray
7) Drip tray plate
8) Drip tray holders
9) Sprout / dispenser
10) Light indicator
11) Water tank holes
FIRST USE
• Remove the device and accessories from the
box. Remove any stickers, protective film or
plastic from the device.
• Make sure the plug is removed from the
power socket.
• Before you use the device for the first time, wipe
all the removable parts with a damp cloth. Never
use aggressive or abrasive cleaning materials,
a scouring sponge or steel wool; this damages
the device.
• Clean the water tank before first use. Fill the
water tank with clean water, release the water
of the water tank reversing the device, dry the
water tank compartment with a dry cloth. Repeat
these steps ± 3 times.
• Do not use any washing liquids in the water tank!
• Place the device on a flat, stable surface, in a
place where it cannot fall over.
• Connect the device to the mains power.
• The device is now ready for use.
DISPELLEING
• Place the device on a flat, stable surface, in a
place where it cannot fall over.
• Remove the water tank cover (2) and fill the
water tank (3) with clean water. Make sure the
water tank is filled at least above the "MIN" mark
and not above the "MAX" mark on the water
gauge (4).
• There are holes in the tank above the "MAX"
indication mark, which will release the water
in case of overfilling and avoid to vacuum the
tank compartment.
EN
Werbung
