Werbung
Verfügbare Sprachen
Verfügbare Sprachen
350-15010
3. OPERATION AND USE
Use the Lux button to set the level for switching the light on (lux ON).
The LED is an adjustment aid for setting the sensor and therefore
responds without any time delay. The LED goes out if the measured
lux level is lower than or equal to the preset value.
4. TECHNICAL DATA
Supply voltage .....................................230V~ ±10%
Switch .................................................N.O., µ 10A
Load
Incandescent lamps ...........................2300W
Fluorescent tubes, not compensated ...1200VA
Halogen incandescent lamps ..............500W
Max. compensation capacity ..............140µF
Max. starting current .........................80A/20ms
Power consumption .............................<1W
Lux range ............................................3 - 300lx
Adjustment range for Lux on .................3 - 270lx
Signal from light sensor ........................0 - 10V
Supply voltage to light sensor 350-10010 56V DC
Tolerance of lux range ..........................±10%
Protection class ...................................IP20
Insulation class ....................................class I
Temperature range ...............................5 to +50°C
CE in accordance with ..........................EN60669-2-1
14
EN
Werbung
