Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Owner's Manual
safety plate lifting clamp BLCW
Contents
1. General
2. Permitted Applications
3. Description of Functions
4. Safety Instructions
5. Lifting
6. Maintenance
7. Disassembling/Assembling
8. Overhaul
9. Disposal
E
10. Troubleshooter's Checklist
11. Warranty
12. Conditions and Specifications
13. Safety Inspection
14. Inspection Schedule
1. General
Please read the instructions in this user's manual carefully before using the lifting clamp. If you have any
doubts, please consult your dealer.
Thank you for choosing one of our high-quality products. The quality systems of management and services of
pewag austria GmbH fully comply with ISO 9001 standards. The many years of vast experience are a guarantee of
optimum quality and safety. pewag lifting clamps are manufactured from high quality alloy steels and comply fully
with all relevant standards and product requirements including: European standard: EN 13155, Australian standard
AS 4991, US standard ASME B30.20-2010 and machinery directive 2006/42/EG.
2. Permitted Applications
The pewag BLCW clamp is equipped with two clamping jaws which are fitted with special plastic to avoid damaging
the lifting object. The pewag BLCW clamp is suitable for the vertical lifting and transporting of a wide range of
products with parallel flat sides such as ferrous and non-ferrous metal plates, structures, aluminium, wood, plastic,
concrete and stone, with the exception of rough-cast concrete. The clamp does not cause any damage to the lifting
objects during lifting. The clamp is locked in the open position. By swivelling the lever and moving the lifting eye
upwards the clamp closes and is now ready for lifting. If the lifting object is put down the clamp opens automatically.
When using the pewag BLCW safety clamp only one (1) object may be transported or lifted at a time. The safety
clamp is provided with a latch, so that when moving without load the clamp remains in the open position. To lift the
above materials the BLCW safety clamps can be used per item, per set or with multiple clamps simultaneously.
When using two or more clamps it is important that each clamp is loaded proportionally. In this case we recommend
using a spreader beam. Additional technical documentation is available from the manufacturer.
8
8
8
9
9
10
10
10
11
11
11
11
11
12
12
Werbung
