Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Drive on the wall
3. Place the car on the wall.
Control Functions
1. Forward/Reverse
The LEFT joystick controls the car forward and reverse.
2. Left turn/Right turn
Push the LEFT joystick forward and the RIGHT joystick
left or right to control the car's direction.
3. Spins
By pushing the joystick on the controller, you can make
your wall car spin around on the spot.
RIGHT SPIN
Push the RIGHT joystick to the right to make the car
spin clockwise.
LEFT SPIN
Push the RIGHT joystick to the left to make the car spin
counter-clockwise.
4. Trim Adjustment
If the car is not driving, you can use the trimmer to adjust.
1. Set the car in GROUND mode
and drive forward.
4. The fabric air skirts can be adjusted outward at a 45
degree angle to ensure a proper air suction to the
wall. The two fabric air skirts on both sides on the
base of the car can not be removed. Without the two
skirts, the car can not work properly. Never rub it
with alcohol or it will be damaged.
2. If the car turns to LEFT without any
input from the right joystick, press the
right trimming button till it
drives straight.
Fabric air skirt
3. If the car turns to RIGHT without any
input from the right joystick, press the
left trimming button till it
drives straight.
Werbung
