Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Open the Ethernet port door;
Insert the SIM card into the slot, with the chip facing UP;
Connect the device to the included PoE injector with Ethernet cable to the data+power end;
Connect the data end of the PoE injector to the computer;
Connect the power adapter to the PoE injector;
Open the
https://192.168.188.1
User name: admin, and there is no password (or, for some models, check user and wireless passwords
on the
sticker);
Enter the PIN code, if required by your mobile network operator;
Use the check for update option to upgrade the device to the latest version. You must have an active
SIM card with available data;
The device will reboot;
Connect again and in the QuickSet menu set a strong password.
Safety Information:
Before you work on any MikroTik equipment, be aware of the hazards involved with electrical
circuitry, and be familiar with standard practices for preventing accidents. The installer should be
familiar with network structures, terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, which can be found in the
original packaging of this product.
This equipment is to be installed by trained and qualified personnel, as per these installation
instructions. The installer is responsible for making sure, that the Installation of the equipment is
compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the
device.
This product is intended to be mounted outdoors on a pole. Please read the mounting instructions
carefully before beginning installation. Failure to use the correct hardware and configuration or to
follow the correct procedures could result in a hazardous situation for people and damage to the
system.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device.
Please use this product with care and operate at your own risk!
This is a Class A product. In a domestic environment, this product might cause radio interference in
which case the user might be required to take adequate measures.
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging
the power adapter from the power outlet.
in your web browser;
Werbung
