Qlima WDH JA 4122 Gebrauchsanweisung Seite 105

CONNECTING USING AP MODE (ALTERNATIVE METHOD)
Before initiating the connection, make sure the unit is in standby mode, with the wifi light
flashing once per second. If not follow the instructions for changing the wifi connection
mode. Also ensure your phone is connected to the wifi network. (We advise turning mobile
data off during setup)
1. Open app and press "+"
to add device, or use the
add device button
4. Ensure the wifi light on the
air conditioner is slowly-
flashing (once per three
seconds), then press on the
orange button at the bottom
of the screen to confirm
This will then transfer the settings to the air conditioner.
Once the connection process has completed, go back to the network settings on your phone to
ensure your phone has reconnected to your wifi router.
2. Select the type of device
as "Air Conditioner".
5. Enter your wifi password
and press confirm.
3. Press on the AP mode button
in the top right of the screen.
6. Go to network settings in
your phone and connect
to the"SmartLife xxx"
connection. There is no
password to enter. Then
return back to the app to
complete setup.
4
105