AEG CHDF 6260 Montage- Und Gebrauchsanweisungen Seite 63

Control Panel
• The switches are mounted on the upper right side of the visor (Fig. 1
-E).
The numbers and symbols have the following meanings (from left to
right):
DF 6260-CHDF 6260
I
= Continuously variable
- fan control
[-=^'1 = Intensive setting
[ffij = Light
[^| = Light OFF
SI = Light ON
DF 6160 - DF6260-ml/1
J l°lll^34» HTTT1 |
1 = fan set 1
2 = fan set 2
3 = fan set 3
4 = fan set 4
(g = Light
g = Light OFF
Sj = Light ON
The fan is controlled by moving the sliding switch.
The extractor part (visor) of the hood is used to switch the fan on and
off when the appliance is switched on (Motor).
When the visor of the appliance is withdrawn, the fan automatically
switches on.
If the visor is pushed in without operating the switches, the fan is
switched off.
The lighting can be separately switched on and off with the slide switch.
Turn the hood on a few minutes before you start cooking then you will
get an underpressure in the kitchen. It should be left on after cooking
for about 15 minutes or until all odours have disappeared.
63