iKarus Nova 6 Bedienungsanleitung Seite 10

Receiver/ Servo Connection
Connect the servo plugs to the receiver outputs according to your prefered control mode.
Example: You prefer function assignment shown in fi gure 1. Connect the roll/aileron
servo plug with receiver output channel 4 and the pitch/ elevator servo plug with receiver
output channel 2. Plug the pitch/throttle servo on channel 3 and tail rotor/rudder servo
on channel 1.
FM
Fig. 1
FM
Fig. 2
TX Crystals 35 MHz
Order no. Chan.
1735961 61
to
1735980 80
Note
In the UK 35 Mhz, in the US 72 MHz is reserved exclusively for fl ying models.
Please use only transmitter crystals from IKARUS. For the receiver you may use crys-
tals of the respective receiver manufacturer.
Mode 4
Tail rotor/ rudder
Chan. 4 = Roll/ aileron
Chan. 3 = Pitch/ throttle
RC
Chan. 2 = Fwd. Pitch/ elevator
LE ORS
Chan. 1 = Tail rotor/ rudder
Mode 1
Roll/ Querruder
Chan. 4 = Tail rotor/ rudder
Chan. 3 = Fwd. Pitch/ elevator
RC
Chan. 2 = Pitch/ throttle
LE ORS
Chan. 1 = Roll/ aileron
TX Crystals 40 Mhz
Order no.
1740950
to
1735953
FM
Fig. 3
Tail rotor/ rudder Tail rotor/ rudder
FM
Fig. 4
Chan.
50
53
Mode 3
Tail rotor/ rudder
Chan. 4 = Roll/ aileron
Chan. 3 = Fwd. Pitch/ elevator
RC
Chan. 2 = Pitch/ throttle
LE ORS
Chan. 1 = Tail rotor/ rudder
Mode 2
Roll/ aileron
Chan. 4 = Tail rotor/ rudder
Chan. 3 = Pitch/ throttle
RC
Chan. 2 = Fwd. Pitch/ elevator
LE ORS
Chan. 1 = Roll/ aileron
TX Crystals 72 Mhz
Order no.
1772911
to
1772960
Chan.
11
60