Pelgrim GVWC270XL Gebrauchsanweisung Seite 160

Network symbol on the display
Flashing 0.5 sec on/off
Flashing 1.0 sec on/off
Glows
Remote control the dishwasher
The dishwasher's network symbol
smartphone/tablet. You can use the ConnectLife app to monitor the dishwasher and change settings.
Remote start the dishwasher
To remote start the dishwasher, press
Close the door. The status light will flash slowly, indicating that remote start is activated.
In the ConnectLife app, select and start a program.
If the door is not closed within 2 minutes, the machine switches off.
NOTE!
The dishwasher can always be used without the app. When the dishwasher's control panel is
pressed, commands from the ConnectLife app are blocked for 10 seconds.
Pair more devices
Pair more devices/users with the dishwasher.
Open the ConnectLife app and log in to your account or register a new account.
Go to Appliances. Click on Add appliances or the + button. Select Home appliances.
Scan the dishwasher's QR code (see the serial number plate). Follow the further instructions in
the app.
Open the dishwasher door and press
On the dishwasher's control panel: Press and hold
on the display, after which the display starts counting down.
Deactivate/activate WiFi connection
After connecting the dishwasher to your local network, you can deactivate the WiFi connection. You
can then reactivate the WiFi connection to reconnect to the same network.
On the dishwasher's control panel: Press and hold
connection. Off appears on the display.
On the dishwasher's control panel: Briefly press
on the display.
Remove devices
Remove all connected devices/users.
On the dishwasher's control panel: Press and hold
3 seconds. UnP appears on the display, after which the display starts counting down.
22
The dishwasher is ready to be connected to your wireless network or
paired with your smartphone/tablet.
The dishwasher is connected to your wireless network.
The dishwasher is connected to your wireless network and the cloud.
is shown on the display when the dishwasher is paired with a
and then
.
. APP will flash on the dishwasher's display.
for 4 seconds to start connecting. P appears
for 8 seconds to deactivate the WiFi
to reactivate the WiFi connection. On appears
for 4 seconds, then press and hold for