Avtech AVH312 Bedienungsanleitung Seite 17

4.3 IP Device Search
Note: This function is available only for "SUPERVISOR". To know more details, please refer to "4.4 User
Level Creation" at page 12.
Click (IP Search) to start searching IP camera(s) connected in the same network segment as the NVR (i.e.
10.1.1.xx by default).
You'll see the list of every connected IP camera with its connection status to this NVR and MAC address.
IP PORT MAC
10.1.1.12 88 00:0e:53:e5:9a:f1
10.1.1.13 88 00:0e:53:a6:91:18
10.1.1.14 88 00:0e:53:a5:9f:a2
10.1.1.15 88 00:0e:53:e1:4e:k5
10.1.1.16 88 00:0e:53:s5:3e:h6
10.1.1.17 88 00:0e:53:e6:4b:26
10.1.1.18 88 00:0e:53:g2:3b:e7

To fix the camera IP address, or allow the NVR to assign an IP address to your IP camera, select "SETUP", and
select "STATIC IP " or "DHCP" for "NETWORK TYPE".
Click "APPLY" and "EXIT" to save your changes.
SETUP
NETWORK TYPE
IP
PORT
USER NAME
PASSWORD
NETMASK
GATEWAY
PRIMARY DNS
To connect to another IP camera, select the unused IP camera from the IP search list, and select "CONNECT".
Select the channel you want to display the camera images, and click "SAVE" to start connection.
CONNECT
IP
PORT
CHANNEL
USER NAME
PASSWORD
All manuals and user guides at all-guides.com
IP SEARCH
PROTOCOL STATUS
AVTECH CONNECTED TO CH1
AVTECH CONNECTED TO CH2
AVTECH UNUSED
ONVIF CONNECTED TO CH3
ONVIF CONNECTED TO CH4
ONVIF CONNECTED TO CH5
AVTECH CONNECTED TO CH6
CONNECT
DHCP
10.1.1.14
80
admin
*****
255.0.0.0
10.1.1.10
168.95.1.1
APPLY EXIT
10.1.1.14
88
CH5
admin
*****
SAVE CANCEL
11
FREQUENTLY-USED FUNCTIONS
SETUP EXIT