Setting Up The Fan - Kesser Ke-Rtv Bedienungsanleitung

8
- Make sure that the cable is not laid in busy areas so that no one can trip over it.
- Do not use the unit or the cable if it is damaged. Take it to a professional for repair.
- For indoor use only.

SETTING UP THE FAN

- STEP 1: Attach the rear fan grille to the
motor housing. Remove the 4 screws
of the motor housing, and then place the rear
the rear fan grille onto the motor housing
and then install the screws
SEE PICTURE-1
- STEP 2: Install the blade on the motor shaft.
And then tighten it with the "fan blade locking screw".
SEE FIG-2
- STEP 3: Place the front fan grille on the rear fan grille,
Tighten the fan grille with the fan clips, then install the "fan blade
locking screw".
the "fan grille locking screw".
SEE FIGURE-3
www.eshopping.de
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany