Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.5.2 Loop Wiring
1.
Plug the connection cable 8 XCBL 431 into the terminal XG2 (OUT 1+2) or
XG3 (OUT 3+4) ( Fig. 6-7/1) on the beacon control module and connect
the flying leads to the terminal points provided ( chapter 6.3.2, page 47).
Fig. 6-7: Example of connection to XG2 and XG3 for ring wiring
2.
For flashing warning beacons with 115 / 230 V AC:
Screw the protective conductor to the housing using a grounding screw
( Fig. 6-8/1).
You connected flashing warning beacon circuits in loop wiring.
4 XBC 001
Fig. 6-8: Terminal for protective conductor
UMN-326-030-001 • V02 • DE-EN • 21.08.2023
51
Werbung
