SEVERIN DK 1042 Gebrauchsanweisung Seite 8

GB
Electric table-top hot-plates
Dear Customer,
Before using the appliance, please read the
following instructions carefully and keep this
manual for future reference. The appliance
must only be used by persons familiar with
these instructions.
Connection to the mains supply
The appliance should only be connected to
an earthed socket installed in accordance
with the regulations.
Make sure that the supply voltage
corresponds with the voltage marked on the
rating label. This product complies with all
binding CE labelling directives.
Important safety instructions
∙ In order to avoid hazards, repairs
to this electrical appliance or its
power cord must be carried out by
our customer service. If repairs are
needed, please send the appliance
to our customer service department
(see appendix).
∙ Before cleaning the appliance,
ensure it is disconnected from the
power supply and has cooled down
completely.
∙ To avoid the risk of electric shock, do
not clean the appliance with water
and do not immerse it in water.
8
∙ Clean the cooking surfaces with
a damp cloth after each use. For
detailed information on cleaning the
appliance, please refer to the section
General care and cleaning.
∙ The appliance is not intended to be
operated by means of an external
timer or separate remote-control
system.
∙ Caution - hot surfaces: This
symbol draws attention to the fact
that the accessible housing surfaces
– especially on and around the
hot-plate - may become very hot
during operation. Do not remove the
warning sticker with this symbol.
∙ This appliance is intended for
domestic or similar applications,
such as
- in shops, offi ces and other similar
working environments,
- in agricultural areas,
- by customers in hotels, motels etc.
and similar establishments,
- in bed-and breakfast type
environments.
∙ This appliance may be used by
children (at least 8 years of age) and