Respekta KG176W-37 Bedienungs- & Installationsanleitung Seite 64

Remove blanking plug (M) on the LH side of the
refrigerator (at the height of the central hinge) then fit
it in the screw holes on the RH side of the refrigerator.
Install central hinge (D) on the LH side, insert and
tighten the two previously removed screws (Fig.5.3).
Remove the screw securing door stop (G) located
at the bottom RH side of refrigerator door (C), then
remove stop (G) and install it on the LH bottom side of
refrigerator door (C).
Install refrigerator door (C).
Move bushing (I) from the top RH side to the top LH side
of the refrigerator door.
Move blanking plug (L) from the LH hole to the RH one.
C C
D D
C C
G G
I I
M M
Fig. 5.9
Fig. 5.10
Fig. 5.11
L L
C C
Fig. 5.12
en-29