Interconnecting The Tank and Generator
•
1-gallon machine—Connect the coaxial cable from the tank into the R.F.
connector on the rear of the generator
(Turn Clockwise to lock connector).
•
Larger machines—Connect the coaxial cable from the tank into the R.F.
connector on the rear of the generator (Turn Clockwise to lock connector)
and the thermo probe cable into the 3 pin connector on the rear of the
generator.
•
Connect the green/yellow wire from the tank to an appropriate earth ground
such as a cold water supply pipe using a grounding clamp or similar approved
grounding device.
Do not attempt to connect or disconnect any cables with the
generator plugged in. Connect the generator plug last.
9