IFM Electronic efector200 Montageanleitung Seite 5

Installation
Retro-reflective sensor:
Fix the prismatic reflector / reflective
tape in desired position. Align the pho-
tocell towards the reflector and fasten
it to a mounting bracket.
Maximum range only with precise
alignment.
Diffuse reflection sensor:
Align the photocell and fasten it to a
mounting bracket
Maximum range only with precise
alignment.
Operation
Check the safe functioning of the sensor.
Maintenance
Keep the lens of the sensor free from soiling.
For cleaning do not use any solvents or cleaning agents which could
damage the plastic lenses.
5