BALMUDA greenfan cirq EGF-3100 Series Bedienungsanleitung Seite 9

3
Insert the AC
adapter plug
firmly from
the side.
▲Insert the AC adapter plug firmly into the
connector.
4
Fix the remaining cord outside of the
Body to the hook positioned at the
highest point of the adjustment rail.
If the cord is not fixed firmly in place, it could be
severed when the angle of the fan changes!
Carry out the following steps in this order:
[ Connect the AC adapter plug ] →
[ Remove the slack from the cord ].
In trying to remove the
slack, do not pull too hard.
▲Pull on the cord on the outside of the Body to remove
the slack inside.
Set it firmly inside
the uppermost part
of the hook.
▲Set it into the groove on the top of the angle
adjustment rail and fix it firmly in place.
English
* The view from
directly behind
Hook
8