Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Auto standby - Adjustment for the auto standby in
hourly increments: Off -> 3h -> 4h -> 5h.
OSD Timer - Lets you adjust the amount of time the On
Screen Menu stays on the screen before disappearing.
Lock
System Lock - Allows you to lock or unlock the menu. You will be
asked to enter a 4 digit password. Use the ► button to quit the
password input. Use the ◄ button to clear. Default password is 0000.
Set Password - Change the default password.
Channel lock - Lock specific TV channels.
Parental Guidance - Lock TV channels based on age restriction.
Key Lock - Lock the TV buttons.
ū Off - All TV buttons are unlocked
ū On - All TV buttons are locked
Setup
Language - Allows you to change the language of the menu.
TT Language - Allows you to change Teletext language.
Audio Languages - Allows you to change audio
language on selected DVB channels.
Subtitle - Select Subtitle On/Off.
Subtitle Language - Allows you to change subtitles
language on selected DVB channels.
Hearing Impaired - If signal provides support for the hearing
impaired, the subtitles can be played by pressing the "Subtitle". If
you set Hearing Impaired ON and switch to a channel with supports
for hearing impaired subtitles will be activated automatically.
LED Status - Allows the user to switch the LED Power indicator light ON
or OFF, when the TV is being operated. (When this option is set to OFF the
LED Power indicator light will flash when the remote control is used).
Blue Screen - Changes the background when there is no input between
transparent and a blue background (Only available on some sources).
First Time Installation - Starts the first time installation.
Reset TV - This resets the menus to factory settings.
Software Update (USB) - From time to time we may release new firmware
to improve the operation of the television (available to download). This
menu lets you install the new software/firmware onto the television.
Further details of how to do this will be issued with the firmware. Contact
the helpline or refer to the 'www.umc-poland.com/blaupunkt/' website.
WARNING: Do not turn off the TV's power until the upgrade is complete!
HDMI CEC* - Allows you to operate devices
connected via HDMI with TV remote control.
ū CEC Control - set CEC functions on/off.
ū Audio Receiver - Sends audio signal from terrestrial/satellite
broadcast via HDMI to the AV receiver without using any additional
audio cables, this functions is available only on HDMI 1 output.
ū Device Auto Power Off - Automatically turn off connected
devices via HDMI CEC, when you turn off TV.
ū TV Auto Power On - when you turn on any of connected
HDMI CEC devices, TV will start up automatically.
ū Device List - show list of connected CEC devices
ū Device Menu - Allows you to access devices menu
and operate the menu using TV remote control.
Version Info - shows version of TV software
Store Mode** - switch ON/OFF shop demonstration mode
* - HDMI CEC must be supported by connected device.
** - available only if store mode was selected during first time installa-
tion
7 Day TV Guide
TV Guide is available in Digital TV mode. It provides information about
forthcoming programmes (where supported by the Digital channel). You
can view the start and end time of all programmes and on all channels for
the next 7 days and set reminders.
1.
Press [TV GUIDE]. The following 7 Day TV Guide will appear.
2.
Navigate through the menu using ▲/▼/◄/►.
You can now:
Set a reminder by pressing BLUE.
View a previous day by pressing RED.
View the next day by pressing GREEN.
View the schedule list by pressing YELLOW.
[INFO] shows detailed information about the selected post
3.
Press [EXIT] to exit the 7 day TV Guide.
USB mode / Media player
USB mode offers playback of various different types of content that you
have saved on your USB Memory Stick. On switching to USB source the
USB mode menu screen will appear. The content will be divided into Photo,
Music, Movie and Text based on file type.
1.
You can navigate through the menus using the scroll
▲/▼/◄/►buttons. To confirm the item you wish to play/view press
[OK] button.
2.
Select the drive you require. (If your drive only has 1 partition you will
only see 1 item).
3.
You can now access the item. Press OK to view.
4.
While viewing you may control the item playback modes by using the
remote control buttons or by invoking playback navigation menu and
selecting on-screen buttons ▲/▼/◄/► and [OK]
NOTE: USB extension cables are not recommended as
they can cause a reduction in picture/audio quality and
stoppages during play back of USB content.
EN
Werbung
