Hitachi RC-AGU1EA0G Anleitung Seite 2

Names and Functions of Remote Controller
This controls the operation function and timer setting of the room air conditioner. The range of control
is about 7 meters. lf indoor lighting is controlled electronically, the range of control may be shorter.
Off Mode Sign
Mode Selector Button
Use this button to select the
operation mode. Every time
you press this button the
mode will change from (Heat)
(Auto) (Cool)
(Dry) (Fan) cyclically.
( Page 3)
GoodSleep Button
( Page )
FrostWash Button
( Page )
Filter Sign Reset Button
( Page 20)
Eco Button
Use this button to set the
Eco mode.
( Page
)
On Timer Button
Select the turn ON time.
( Page )
Off Timer Button
Select the turn OFF time.
( Page )
LeaveHome Button
( Page 8)
My Mode Button
( Page )
Backlight function
• Backlight is to see the LCD readings in the dark.
• On Pressing any key, the LCD panel lights up for a period of approx. 10 seconds. After approx. 10
seconds the light automatically switches off.
• The function is independent of all other functions of the air conditioner.
• The backlight color is white.
Precautions for Use
• Do not put the remote controller under direct sunlight and high temperature.
• Do not drop it on the fl oor, and protect it from water.
• If you press the FUNCTION button during operation, the air conditioner may stop for about 3 minutes
for protection before you can start it again.
Signal Transmission
- 2 -
Invalid Operation Sign
Shown at invalid setting or
operation
Transmission Sign
The transmission sign blinks
when a signal has been sent.
Fan Speed Button
Select the fan speed.
( Page 3)
On/Off Button
Press this button to start
operation.
Press it again to stop
operation.
( Page 3)
Powerful Button
( Page )
Silent Button
( Page
Temperature Button
Room temperature setting.
Value will change quicker
when keep pressing.
( Page )
Reset Button
( Page 20)
Up/Down Button
Control the angle of the
horizontal air deflector.
( Page )