Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SETUP
Prior to making connections or changing any existing connections, switch off
all units.
1
Connect the signal source with line level (e.g. CD player) or to the
input LINE IN.
2
Connect the output LINE OUT to your stereo or active speakers.
3
Connect the receiver each to the mains via the included power unit
(230 V~, 50 Hz). The POWER indicator lights blue.
4
Now, you can adjust the desired volume with the buttons VOL+ and
VOL- on the remote control. When actuating a button, always direct
the remote control towards the sensor located at the receiver's front
panel. There must be no obstacles between remote control and the
sensor.
5
For muting the sound, press the button
red. To switch on the sound again, press the button once again. The
MUTE indicator extinguishes.
6
After the operation, disconnect the mains plug of the power supply unit
from the socket, to prevent unnecessary power consumption.
Fig. 4-1 Connection Example
10
. The MUTE indicator lights
Werbung
Inhaltsverzeichnis
