Commodore Amiga 1084S Bedienungsanleitung Seite 8

GB-10 Monitor 1084S
Before replacing the plug cover, make certain that the cord grip is clamped over
the sheath of the lead - not simply over the three wires.
4. Safety Precautions
This monitor has been engineered and manufactured to assure your personal
safety. However, improper use can result in potential electrical shock or fire hazards.
Please observe the following basic rules when using your monitor. Also, heed all
warnings and instructions marked on the monitor's cabinet.
Do not attempt to service the monitor yourself. Opening or removing covers
may expose you to dangerous voltages or other hazards. Dangerous high
voltage is present even when the monitor is unplugged. Refer all servicing to
qualified personnel.
Do not overload AC outlets or extension cords. This may result in a shock or fire
hazard.
Do not use more than one plug adaptor in one power outlet.
Do not use the monitor near water or excessive moisture.
Do not block the monitor's ventilation slots by placing objects on top or under
neath the monitor.
Monitor 1084S GB-11
Do not place the monitor
e near or over a radiator or heat register
e where sunlight or bright room light will fall directly on the screen
e on a sloping shelf or try to mount it on a wall.
Do not use alcohol, ammonia-based products, or an aerosol spray to clean the
monitor screen. To clean the screen, unplug the monitor and wipe with a slightly
damp cloth.
Do not bring magnetic devices near the screen. They may damage the colour
purity of the picture.
Unplug the monitor
e if you will not be using it for an extended period
e during an electrical storm
e before cleaning it