XCLEA QYSDJ01 Bedienungsanleitung Seite 8

Installation
Installing the dust collector (optional)
Step 1: Find a suitable location to place the dust collector;
>0.5 m
Caution
1. When charging, do not install the mopping module to prevent water seeping from the wet mop and damaging the floor.
2. Do not use this product in the room of infants and young children, keep it away from infants and young children.
3. When the main unit is docked at the dust collector, do not let children or pets approach it or collide with the main unit to avoid danger.
4. In order to facilitate the smooth return of the main unit to the dust collector after cleaning, it is recommended to start the appliance from the dust collector and that you do not move the dust collector
during the cleaning process.
5. The dust collector has dust collection and charging functions, and a new dust bag is installed before the product leaves the factory.
Installing the charging dock (optional)
Step 1: Find a suitable location to place the charging dock;
>0.5 m
>0.5 m
>1.5 m
>0.5 m
>1.5 m
Step 2: Press and hold the Power button on the main unit to turn on the robot vacuum and mop
cleaner, then press the Dock button for the robot to search for the dust collector to charge.
Step 2: Place the charging dock against the wall;
6
Dock button