LGB 55050 Bedienungsanleitung Seite 11

Operation
The red LED on the Wireless Receiv-
er illuminates and shows that the
system is ready to operate. If the
Emergency Stop button on a remote
is pressed, the LED flashes.
Select the number of the track block
on the remote (see instructions for
remotes). Now the selected Wireless
Receiver transfers the control inputs
from the remote to the connected
51070. With analog operation, only
speed, direction and emergency stop
can be controlled.
Attention! Do not select the same
track block from two remotes at the
same time. The wireless system will
not function properly.
Power Supply
Attention! For safety and reliability,
operate this product with LGB power
supplies (transformers, power packs
and controls) only. The use of non-
LGB power supplies will void your
warranty.
For more information on LGB power
supplies for indoor, outdoor and
multi-train operation, see the LGB
catalog.
AUTHORIZED SERVICE
Improper service will void your warranty.
For quality service, contact your author-
ized retailer or the LGB factory service
station:
Gebr. Märklin & Cie. GmbH
LGB Service-Abteilung
Witschelstraße 104
90431 Nürnberg
Deutschland
Telephone: +49 (911) 83707-38
Telefax: +49 (911) 83707 818
CAUTION! This model is not for children
under 8 years of age. This model has
small parts, sharp parts and moving
parts. Save the supplied packaging and
instructions.
Products, specifications and avail-
ability dates are subject to change
without notice. Some products are
not available in all markets and at all
retailers. Some products shown are
pre-production prototypes. LGB,
Märklin logotype Gebr. Märklin & Cie.
GmbH. Other trademarks are the
property of
© Gebr. Märklin & Cie. GmbH
their owners.
13