Navitel R980 4K Benutzerhandbuch Seite 27

26 | USER MANUAL
Connecting to a mobile
device
Permissible excess
EN
Note. The built-in power source is only for turning off the device correctly when the power is turned off; for the full operation of the device, a
constant power connection is required.
* Note. The mode is available only when the DVR is connected to a permanent power supply through a device that prevents excessive battery
discharge — NAVITEL SMART BOX MAX.
NAVITEL s.r.o. hereby declares that the device NAVITEL R980 4K is compatible with the European directive RED 2014/53/EU.
The full text of Declaration of conformity is available at the following internet address:
www.navitel.cz/en/declaration_of_conformity/r980-4k.
The up-to-date version of the user manual is available on the website
The function allows you to connect your smartphone to the DVR via Wi-Fi. With an active connection, you will be able
to view, delete and transfer media files recorded by the DVR.
The function sets the permissible excess of speed relative to the allowed speed limit on a given section of the road.
If the total speed (allowed speed limit along with the permissible excess) is exceeded, the recorder will make a
sound. Setting range: from -5 to 25 km/h in increments of 5 units. To set the necessary parameters go to the GPS
> Permissible excess.
https://navitel.com in the section Technical support > Instructions > Documentation.