Werbung
Verfügbare Sprachen
Verfügbare Sprachen
KB102
Installation Instructions
Step 1.
The Child Protection Seat (CPS) is designed
to be mounted on a bathroom or fitting room
partition. The unit can also be mounted on a
side wall (hardware not included). Establish
proper CPS placement, taking door swing
and clearance into consideration.
Step 2.
Place the bottom of the unit 2" (51 mm)
above the bottom of the partition or 14" (356
mm) above the floor, whichever is higher.
Use the CPS as a template for locating and
marking the mounting holes.
Step 3.
After establishing the proper placement of the
four mounting holes, drill through the partition
using a 3/8" (10 mm) drill bit.
Step 4.
Insert the four threaded barrel bolts (supplied)
from the outside of the partition. Mount the unit
using the four ¼" (6 mm) bolts and washers.
Step 5.
Position Koala sign (supplied) on the outside
of the restroom door. Replacement parts can
be purchased from your local distributor or by
calling toll free 888.733.3456 or 303.539.8300
in the U.S.
2
Werbung
