Foscam FI9910W Benutzerhandbuch Seite 17

Add the NVR
1. Run Foscam VMS, then you can create a local administrator account and login.
2. Tap the "+" button on the Foscam VMS and follow the setup wizard to add your
NVR.
Please refer to the user manual for more detailed adding steps.
3. Preview: click device in Lan Device list to enter preview interface, select a channel
to view it's picture, click
Upgrade
1. You can upgrade your NVR and cameras system with local Software.
NVR Upgrade:
Download the firmware to the U disk → Insert U disk to NVR → USB port → Right click →
Main Menu → Upgrade → click Refresh → click Upgrade to upgrade your NVR.
Note: Don't shut down the power during upgrade. After upgrading NVR restarts.
to enter, as follow shows:
17