Werbung
Verfügbare Sprachen
Verfügbare Sprachen
In addition, the product has 2 fixing clamps and a soldering
iron holder. Other uses or changes to the product are consid-
ered to be contrary to the Intended use and may harbour risks
of injury and damage. The manufacturer does not accept any
liability for injury or damage resulting from use of this product
contrary to its Intended use. The product is intended for indoor
use only. The product is not intended for commercial use or for
use in other application.
Not suitable for ordinary lighting in household
room illumination.
Description of parts
Precision engineer's LED magnifying glass
1
Lens (magnification 2.5 / 5 times)
2
Battery compartment cover
3
Battery compartment
4
Ball joint
5
Retaining screw (lens ball joint)
6
Magnifying glass fixing clamp
7
Retaining screw (magnifying glass height adjustment)
8
On / off switch
9
Supporting rod (height adjustment)
10
Fixing clamp (repair device)
11
Retaining screw (repair device height adjustment)
12
Soldering iron holder
13
Base
14
Repair device
15
22 GB/IE
Werbung
