Werbung
Verfügbare Sprachen
Verfügbare Sprachen
G
G
power unit, outlet-
G
covers, finger guard
G
G
bowl
G
G
G
flexible beater
G
G
G
tools, feed chute extension
G
G
G
G
G
G
G
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as urban
waste.
It must be taken to a special local authority differentiated waste collection centre
or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative
consequences for the environment and health deriving from inappropriate
disposal and enables the constituent materials to be recovered to obtain
significant savings in energy and resources.As a reminder of the need to
dispose of household appliances separately, the product is marked with a
crossed-out wheeled dustbin.
cleaning and service
care and cleaning
Always switch off and unplug before cleaning.
A little grease may appear at outlet
it. This is normal - just wipe it off.
Wipe with a damp cloth, then dry after each use.
Always replace the outlet covers when not in use.
Never use abrasives or immerse in water.
Wash by hand, then dry thoroughly or wash in the dishwasher.
Never use a wire brush, steel wool or bleach to clean your
stainless steel bowl. Use vinegar to remove limescale.
Keep away from heat (cooker tops, ovens, microwaves).
Always remove the flexible wipers after use for cleaning and
storage: Firmly pull and twist each wiper until it slides off the
stainless steel beater arm.
To clean the stainless steel beater arm simply remove the flexible wipers
and wash by hand in hot soapy water and dry thoroughly.
The flexible wipers should be cleaned immediately after use by
hand in hot soapy water. Use the cleaning brush supplied to clean
INSIDE each wiper. Rinse the flexible wipers under hot running
tap water and dry thoroughly.
To refit the flexible wipers, lubricate the stainless steel beater arms with
a small amount of fresh cooking oil. Slide the flexible wipers onto the
stainless steel arm. Ensure each wiper covers the full length of the arm
and is past the tip at the end. Repeat the process for the second wiper.
Note: the tool should only be used with both wipers fitted.
Wash by hand, then dry thoroughly or wash in the dishwasher.
service and customer care
If the cord is damaged it must, for safety reasons, be replaced
by
or an authorised
KENWOOD
If you need help with:
using your machine
servicing or repairs
Contact the shop where you bought your machine.
Designed and engineered by Kenwood in the UK
Made in China
when you first use
repairer.
KENWOOD
8
Werbung
