Samsung BRB2600 Serie Bedienungsanleitung Seite 42

Operations
Cool Select+
(Type 1)
03 Door Alarm
Door Alarm
Device
authentication
04 Power (3 sec)
Power
42 English
Untitled-16 42
Each time you press and hold Cool Select+ for 3 seconds, the
operating mode switches in this sequence:
Freeze  Soft Freezing (-5 °C)  Chill (-1 °C)  Cool (2 °C)
CAUTION
• If you switch the mode from Freezer to Cool Select+, the stored
food may leak juice or liquid from the food.
• Do not store meat or fishery for an extended time in Cool Select+
mode. The food may freeze or spoil because of inappropriate
temperature settings for the food to store.
• If the refrigerator recovers power from an extended time of
inactivity, the Cool Select+ settings may be reset to factory
defaults. Check out the Cool Select+ settings before using the
refrigerator.
You can set the alarm for a reminder. If the door is left open for
more than 2 minutes, the alarm will sound with the Alarm indicator
blinking.
You can toggle to enable and disable the alarm by pressing Door
Alarm.
When connecting the refrigerator to the Samsung Smart Home App or
Samsung smart devices such as Samsung smart TVs, follow the app's
or device's onscreen instructions and press and hold Door Alarm for
5 seconds. The temperature panel displays "on" for 5 seconds before
proceeding with the authentication procedure. Note that the Control
Lock function will not be affected by this authentication.
To turn the refrigerator on, press and hold Power for 3 seconds. Both
the fridge and the freezer turn on, and do the lamps accordingly.
If you press and hold Power for 3 seconds again, the refrigerator
(both the fridge and the freezer) turns off, and the room lamps also
turn off.
2017-11-23 3:43:25