Appears on a regular schedule, e.g. every 30 days.
The Ground Fault Circuit Interrupter (GFCI) or Residual Current Device (RCD) is an important safety device and must be
tested on a regular basis to verify its reliability.
Every user should be trained to safely test the GFCI or RCD associated with the hot tub installation.
A GFCI or RCD will have a TEST and RESET button on it that allows a user to verify proper function.
Warning: If freezing conditions exist, a GFCI or RCD should be reset immediately or spa damage could result.
The end user should always trained to test and reset the GFCI or RCD on a regular basis.
02.07 Reminder Messages Continued
GB
Appears on a regular schedule, e.g. every 90 days.
Change the water in the spa on regular basis to maintain proper chemical balance and sanitary conditions.
Appears on a regular schedule, e.g. every 180 days.
Vinyl covers should be cleaned and conditioned for maximum life.
Appears on a regular schedule, e.g. every 180 days.
Wood skirting and furniture should be cleaned and conditioned per the manufacturers instructions for maximum life.
Appears on a regular schedule, e.g. every 365 days.
Filters should be replaced occasionally to maintain proper spa function and sanitary conditions.
As needed.
Install new mineral cartridge
28
Alternates with temperature or normal display.
Alternates with temperature or normal display.
Alternates with temperature or normal display.
Alternates with temperature or normal display.
Alternates with temperature or normal display.
Alternates with temperature or normal display.