S&P SILENT DESIGN Serie Bedienungsanleitung Seite 12

The SILENT DESIGN extractor fan range The SILENT DESIGN extractor fan range
is manufactured to the high standards of is manufactured to the high standards of
production and quality as laid down by the production and quality as laid down by the
international Quality Standard ISO 9001. international Quality Standard ISO 9001.
All components have been checked and All components have been checked and
every one of the fi nal products will have every one of the fi nal products will have
been individually tested at the end of the been individually tested at the end of the
manufacturing process. manufacturing process.
On receipt of the product we recommend On receipt of the product we recommend
that you to check the following: that you to check the following:
1- That it is the correct model. 1- That it is the correct model.
2- That the details on the rating label are 2- That the details on the rating label are
those you require: voltage, frequency... those you require: voltage, frequency...
The installation must be carried out in The installation must be carried out in
accordance with the electrical standards accordance with the electrical standards
in force in your country. in force in your country.
This appliance is not intended for use by This appliance is not intended for use by
young children or infi rm persons unless young children or infi rm persons unless
they have been adequately supervised by they have been adequately supervised by
a responsible person to ensure that they a responsible person to ensure that they
can use the appliance safely. Young chil- can use the appliance safely. Young chil-
dren should be supervised to ensure that dren should be supervised to ensure that
they do not play with the appliance. they do not play with the appliance.
Before installing and wiring Before installing and wiring
the unit, ensure that the main supply is the unit, ensure that the main supply is
disconnected. disconnected.
Fig. 1: Fig. 1:
1- Protection grille 1- Protection grille
2- Connection terminals 2- Connection terminals
3- Outlet with backdraught shutter 3- Outlet with backdraught shutter
4- Cable entry 4- Cable entry
The SILENT DESIGN is suitable for wall or The SILENT DESIGN is suitable for wall or
ceiling mounting and can either discharge ceiling mounting and can either discharge
directly to the outside or via an individual directly to the outside or via an individual
ducting system (see Fig.2). ducting system (see Fig.2).
The unit can be mounted on the wall or The unit can be mounted on the wall or
ceiling using the 4 rubber blocks and the ceiling using the 4 rubber blocks and the
All manuals and user guides at all-guides.com
12 12
screws provided. screws provided.
Make a hole in the wall or ceiling of Make a hole in the wall or ceiling of
diameter: diameter:
- SILENT-100 DESIGN: 105 mm - SILENT-100 DESIGN: 105 mm
- SILENT-200 DESIGN: 125 mm - SILENT-200 DESIGN: 125 mm
- SILENT-300 DESIGN: 160 mm. - SILENT-300 DESIGN: 160 mm.
If the unit is to be installed with indi- If the unit is to be installed with indi-
vidual ducting, use a standard duct of vidual ducting, use a standard duct of
diameter: diameter:
- SILENT-100 DESIGN: 100 mm - SILENT-100 DESIGN: 100 mm
- SILENT-200 DESIGN: 125 mm - SILENT-200 DESIGN: 125 mm
- SILENT-300 DESIGN: 150 / 160 mm. - SILENT-300 DESIGN: 150 / 160 mm.
Ensure that there are no obstructions to the Ensure that there are no obstructions to the
airfl ow and that the impeller turns freely. airfl ow and that the impeller turns freely.
Fix the extractor to the wall in such a way Fix the extractor to the wall in such a way
that it is not distorted in order to avoid that it is not distorted in order to avoid
noise generation or problems with the noise generation or problems with the
rotation of the impeller. Make sure that the rotation of the impeller. Make sure that the
backdraught shutter opens freely and has backdraught shutter opens freely and has
not being damaged in transit. Introduce not being damaged in transit. Introduce
the mains cable through the cable entry the mains cable through the cable entry
(4) and fi x it to the wall. (4) and fi x it to the wall.
Connect the electrical wiring as set out Connect the electrical wiring as set out
below and then mount the protection below and then mount the protection
grille (1). grille (1).
The SILENT DESIGN is an extractor The SILENT DESIGN is an extractor
designed for a single phase supply, with designed for a single phase supply, with
voltage and frequency as indicated on voltage and frequency as indicated on
the rating plate of the unit. The units the rating plate of the unit. The units
are manufactured with double electrical are manufactured with double electrical
insulation (Class II) and therefore they do insulation (Class II) and therefore they do
not need an earth connection. not need an earth connection.
The electrical installation must include a The electrical installation must include a
double pole switch with a contact clear- double pole switch with a contact clear-
ance of at least 3 mm. ance of at least 3 mm.
The electrical cable must enter the SILENT The electrical cable must enter the SILENT
DESIGN through the cable entry (4). DESIGN through the cable entry (4).
Once the cable has been introduced pro- Once the cable has been introduced pro-
ceed using the electrical wiring diagram ceed using the electrical wiring diagram
applicable to the selected model. applicable to the selected model.