sweeek. BURDIGALA PT3X9KDWH Montageanleitung Seite 11

ASSEMBLING YOUR PARTY TENT
• Always assemble the tent on a flat surface.
• Use the connectors A and B to assemble tubes 1 and 2 to form the roof structure.
• Then fix tubes 3 to the roof structure.
• Using the elastic bands and grommets, attach the roof covering to the structure. Next, fix the tent
to the ground using the cords (to attach to the correct places) and the spikes supplied (it will be
necessary to knot them in place).
• Check that the uprights are perpendicular to the ground and to the cross bars then put a spike into
each plastic foot plate.
• Finally, you can attach the sides, using the velcro bands.
REMINDER
• Guaranteed against manufacturing defects for normal use.
• Damaged caused by meteorological conditions or by incorrect use of the product are not covered
by the guarantee.
• These tents are designed for occasional use only (wedding, first communions, other celebrations...)
and cannot to be used for permanent storage.
26/10/2023
EN
11