Pioneer SA-560 Bedienungsanleitung Seite 6

PANEL FACILITIES
@) BALANCE control
Should normally be left in the center position. Adjust
balance if the sound is louder from one of the speakers. If the
right side is louder, turn toward the left position and if the
left side is louder, turn toward the right position.
LOUDNESS switch
Use when listening at low volume levels.
[OFF] — Released position: Should normally be left in this
position.
[ON] — Depressed position: Boosts low and high frequen-
cies to give added punch to playback even at low volume.
@) ADAPTOR/TAPE2(/CD/VIDEO) switch
Use when there is an adaptor component (graphic equalizer,
etc.), compact disc player, video cassette recorder or tape
deck connected to the ADAPTOR/TAPE 2 terminals.
[OFF] — ADAPTOR/TAPE2 indicator goes out: When not
in use.
[ON] — ADAPTOR/TAPE2 indicator lights: When using
the adaptor component or listening to the component
connected to the ADAPTOR/TAPE2 terminals.
NOTE:
When no connections are made to the ADAPTOR/TAPE 2 ter-
minals, or when they are not in use, be sure to set this switch to
the OFF position. (No-sound will be heard if it is set to the ON posi-
tion.)
@ FUNCTION switches
Use to select playback source.
NOTE:
Function switches should be pressed firmly; otherwise, all the func-
|
:
|
|
: