Make sure the system voltage corresponds to the charger type
plate details. There is a risk of electric shock.
Cable connections to be separated by pulling the plug only. Pulling
the cable could damage both the cable and plug. As a result,
electric safety would no longer be guaranteed.
Never use the charger when the cable, plug or the machine is
damaged by external influences. In case damage let repaired in
authorized workshop
Make sure the cooling function is not limited by covering the cooling
slots. Do not operate the appliance near heat sources or on a
flammable surface.
BATTERY
Recharge only with the charger specified by the manufac-
turer. A charger that is suitable for one type of battery pack may
create a risk of fire when used with another battery pack.
Use power tools only with specifically designated battery
packs. Use of any other battery packs may create a risk of injury
and fire.
When battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails, screws
or other small metal objects, that can make a connection
from one terminal to another. Shorting the battery terminals
together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause irritation
or burns.
Vapours may leak out in case of unauthorised use or when using
a damaged accumulator. Bring fresh air and seek medical advice
if experiencing difficulties. Vapours may irritate the respiratory
system.
MAINTENANCE AND STORAGE
DANGER!
Switch the appliance off and remove the contact key
before any adjustment, cleaning and servicing work.
Wait until all rotating parts have stopped and the
appliance has cooled down.
Keep hands away from all cutting edges and moving
parts. Fingers can be pulled into cutting carriage and be
cut or crushed.
After every work stint, clean the machine thoroughly to remove
all dust and debris, and repair or replace any faulty parts.
Check the collection bag at regular intervals for any wear and
aging.
Clean the ejection opening and cover at regular intervals.
Keep the device, in particular the air vents, clean at all times.
Never spray water on the device body!
Never open the charger. Contact a specialised workshop in case
of any defect.
The outer battery surface must be clean and dry before the battery
starts being charged.
Chargers are exclusively suitable to charge these replaceable
batteries
Typ LI 22 / LBC202Z-2)
Charging any other battery is not allowed.
WARNING
Risk of fire! Risk of explosion!
Never use damaged, defective or deformed accumulators. Never
open or damage the accumulator or let it fall on the ground.
Never charge the battery in an environment with acids and easily
flammable materials.
Protect the battery against heat and fire.
Battery to be used at the ambient temperatures between 10°C and
+40°C only.
Never put the battery on heaters and do not expose it to strong
sunlight for a long time.
After being subject to heavy load, let the battery cool down first.
Short circuit - do not bridge the accumulator contacts with metal
parts.
The accumulator must be packaged (plastic bag, box) or accumula-
tor contacts must be sealed up for accumulator disposal, transport
or storage.
Never clean the machine and its components with solvents,
flammable or toxic liquids. Us only a damp cloth making.
Keep all nuts, bolts and screws tight to be sure the equipment is
in safe working condition;
Only a regularly maintained and treated appliance can serve as
a satisfactory aid. Insufficient maintenance and care can lead to
unforeseen accidents and injuries.
Repairs and works specified in these Instructions may
only be performed by qualified authorised staff.
Use only original accessories and original spare parts. Using
other spare parts can result in accidents/injuries of the user. The
manufacturer will not be liable for any such damage.
Please contact our service department if you need accessories or
spare parts.
Spare Parts
Knife
Art.No. 77010339
GB
41