AEG EM 50-2 Bedienungsanleitung Seite 9

EM 50-2
snow with FORCE HEAT, before OFF TEMP is changed.
the heat does not shut off after ice/snow melting
o Afterrun time is too long – reduce AFTERRUN time and activate
RESTART in the menu.
o Moisture detection in the GROUND SENSOR/GUTTER SENSOR
is turned off – set MOIST CTRL to ON in the menu.
If the ALARM button flashes red, one of the following errors has oc-
curred. This can be displayed under the menu: ALARM.
"tEMP sEnsOR 1" - Temperature sensor in ground or roof
sensor 1 defective.
"tEMP sEnsOR 2" - Temperature sensor in ground or roof
sensor 1 defective.
"OutdOOR sEnsOR" - Outdoor sensor defective.
"sEnsOR HEatER" - Short circuit of heating element in
ground or roof sensor.
© 2012 OJ Electronics A/S - ® OJ ist eine eingetragene Marke der OJ Electronics A/S
English
9