Schartec DC660 Bedienungsanleitung Seite 6

Timer settings
1. If the time shows "__: __" displayed, then timer setting up or down has no function.
2. During the timer setting, a key must always be pressed within 60 sec. otherwise the timer menu is automatically
exited.
3. The time interval between up and down must be longer than 32 min, otherwise "Ero1" appears.
4. To set the hours or minutes in the timer mode, press "Time setting" once briefly.
5. To switch between up and down in the timer mode, press "Mode" once briefly.
6. To exit the timer menu for a short time, press "Stop".
7. If the timer setting is saved, then it remains saved even after a battery change.
Press "Mode" to switch
between "automatic" and
"freely selectable". Select your
desired timer setting (1, 2 or 3)
Press "Time setting", the
minute display flashes. The
minute display can be set.
Press "Time setting", the
minute display flashes. The
minute display can be set.
Press "Time setting" for 3 sec.
to enter the timer menu. Use
"Up" and "Down" to select the
days.
Press "Up" or "Down" to set
the minute display.
Press "Up" or "Down" to set
the minute display for
downward.
6
Press "Time setting", the hour
display flashes. The hour
display for upwards can be
set.
Press "Mode" to confirm the
time. The display changes to
time setting downwards. The
hour display flashes.
⋯⋯
Press "Time confirmation" to
confirm the time setting for
down. The display changes to
"Mo" Up and the hour display
flashes.
V. 231005
Press "Up" or "Down" to set
the hour display.
Press "Up" or "Down" to set
the hour display for
downward.
After you have finished setting
the time for the whole week,
press "Time confirmation" for 3
sec, the hours and minutes
display will blink, then settings
are saved and the menu will exit
automatically.