Schartec DC660 Bedienungsanleitung Seite 5

Change mode
Press and hold "Mode"
for 2 sec., switch to
manual mode 0
Press "Mode" again for 2
sec., freely selectable
mode 1
Set time
Press "Mode" to switch
to manual mode.
Press "Up" or "Down" to
set the minutes.
Manual mode: Wireless wall switch without timer function
Automatic mode: Wireless wall switch with timer function
Freely selectable mode: Wireless wall switch with timer function freely selectable
0 = no timer function
1 = each day has its own timer function
2 = Mon-Sun one and the same timer function
3 = Mon-Fri one and the same timer function, Sat. own timer function, Sun. own timer function
Press "Mode" again for 2
sec., switch to
automatic mode 1
Press "Mode" again for 2
sec., freely selectable
mode 2
The current time can only be set in manual mode. The settings must be made
within 60 sec. after each keystroke, otherwise the menu is exited automatically.
Press "Time setting" for
5 sec. and then release,
the hour display flashes.
Press "Time setting" again,
the day of the week starts
flashing.
Press "Mode" again for 2 Press "Mode" again for 2
sec., switch to
automatic mode 2
Press "Mode" again for 2
sec., freely selectable
mode 3
Press "Up" or "Down" to
set the hours.
Press "Up" or "Down" to
set the day of the week
5
sec., switch to
automatic mode 2
Now press "Mode" again
for 2 sec. Jumps the menu
to the beginning, manual
mode (0)
Press "Time setting"
again, the minute
display starts flashing.
Press "Time Confirmation" for 3
sec, hours and minutes display
flashes and saves. Press "Time
setting", second goes to 0 and
starts counting
V. 231005