Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Items included
Item
Main unit
Supporting plate
Front cover
Double-end wrench
Allen wrench
Instruction manual
Warranty card
Installation and preparation
● Since the NVS-07 is very heavy, exercise sufficient care when unpacking so the unit does not drop.
Danger
(Unpacking procedure)
• Remove the cardboards and cushioning materials
around the unit.
• Cut off the cardboard around the bottom of the unit.
• Slightly tilt the unit to remove two bases that support
the unit.
• Unlock all four wheels.
• Slowly push the unit forward while holding it securely.
Then unload it from the pallet.
The toolbox contains the clay roller shelf, tools,
instruction manual, and warranty card.
(Installation)
• Install the unit. In a flat location for rattle-free operation
and lock the casters.
• Place the clay roller shelf in the groove and support
below the nozzle.
• Fit the front cover to the nozzle
7
Quantity
1
1
1
2
17 x 13; used to tighten or loosen the nozzle and screws
1
M2.5; used to replace stainless steel wire for clay cutter
1
1
The unit weight is approximately 140 kg.
Have three or more people unpack this unit.
Remarks
Slightly tilt the main unit to
remove the base (also the
Slowly unload the unit from the pallet.
opposite one).
English
Cut off the cardboard
around the bottom of
the unit.
Werbung
